Pink Limited Edition - $690
Gold Midas Edition - $570
Special Edition - $700
Standard Edition - $550
The Ripple TKL is a premium TKL designed by Upas from CannonKeys. Everything from the keyboard to the PCB is designed in-house! Some key design features of the Ripple are the customizeable badge on the front, the stunning side and back profile, and the wavy weight integrated into the bottom of the case.
All versions now come with the 3D Ripple design weight, however the Standard Edition will be in sandblasted brass and the Special Edition will be in either PVD Silver or Gold. Both Standard and Special versions will be available in Silver, Navy, Blue-Grey, E-White, and Black.
New to Extras are the Limited Edition Pink and Midas Edition Gold keyboards. Pink comes with PVD silver weight and badge, while the Midas comes with sandblasted brass weight and badge.
Unbuilt weight of aprx 1.8kg
• 6063 Aluminum Anodized Top and Bottom in WK or WKL
• Universal FR4 plate
• Sandblasted Brass Front 3D Badge
• Sandblasted Brass External Weight w/ 3D Ripple Weight Design
• Hotswap PCB
• Unified C3 Daughterboard and JST Cable
• 50A O-ring and Poron Plate Modifiers
• Poron, Silicone, PE Foam, and EVA Foam Top Pocket Modifiers
• Authenticity Card
• Custom Silicone Feet (bumpon compatible)
• Screw Hardware and Hex Keys to use on the Screw Hardware
• CannonKeys Carrying Case
• Microfiber Cloth
• 6063 Aluminum Anodized Top and Bottom in WK or WKL
• Universal Aluminum Plate
• PVD Brass Front Badge (3D Ripple and Logo Badge)
• PVD Brass External Weight w/ 3D Ripple Weight Design
• Hotswap PCB
• Unified C3 Daughterboard and JST Cable
• 50A O-ring and Poron Plate Modifiers
• Poron, Silicone, PE Foam, and EVA Foam Top Pocket Modifiers
• Authenticity Card
• Custom Silicone Feet (bumpon compatible)
• Screw Hardware and Hex Keys to use on the Screw Hardware
• CannonKeys Carrying Case
• Microfiber Cloth
• 6063 Aluminum Anodized Top and Bottom in WK or WKL (Pink Only)
• Universal Aluminum Plate
• PVD Brass Front Badge (3D Ripple and Logo Badge)
• PVD Brass External Weight w/ 3D Ripple Weight Design
• Solder PCB
• Unified C3 Daughterboard and JST Cable
• 50A O-ring and Poron Plate Modifiers
• Poron, Silicone, PE Foam, and EVA Foam Top Pocket Modifiers
•Authenticity Card
• Custom Silicone Feet (bumpon compatible)
• Screw Hardware and Hex Keys to use on the Screw Hardware
• CannonKeys Carrying Case
• Microfiber Cloth
• 6063 Aluminum Anodized Top and Bottom in WK or WKL (Gold Only)
• Universal Aluminum Plate
• Sandblasted Brass Front 3D Badge
• Sandblasted Brass External Weight w/ 3D Ripple Weight Design
• Hotswap PCB
• Unified C3 Daughterboard and JST Cable
• 50A O-ring and Poron Plate Modifiers
• Poron, Silicone, PE Foam, and EVA Foam Top Pocket Modifiers
• Authenticity Card
• Custom Silicone Feet (bumpon compatible)
• Screw Hardware and Hex Keys to use on the Screw Hardware
• CannonKeys Carrying Case
• Microfiber Cloth
The standard edition is only available with sandblasted brass weight and badge
All plates are available in fixed 7U and Universal Layouts
From the Designer, Upas
"I actually found the concept of “Ripple” for this keyboard while in the design process. For some boards, I start with a concept and design from there. For others - like this one - I played around a bit with drawings and design elements I could use before settling on the concept of a Ripple - the movement water makes when something is dropped in it. From there, designing the rest of the keyboard fell into place.
The contours of the top case and weight are meant to mimic water flowing, a very wavy look. The stepped corner cuts are meant to resemble expanding concentric circles like those found in a ripple, and the side cuts match the wavy-ness of the rest of the top case."
The goal for this keyboard was to have thin top bezel, with a low front height and moderate typing angle. This, in addition to horizontal side cuts to achieve a stunning side and back profile were achieved through several rounds of prototypes to make sure everything was just right.
The mount is a O-ring gasket hybrid mount, with a ton of customizability. Different combinations of top foam gaskets and O-rings can be used to accomplish several different typing feels and sounds.
A Stock units should not have any external scratches or egregious marks seen when built. Any internal flaws and marks (including hook marks) that are not seen when built do not constitute a B Stock unit.
Screw holes are not fully anodized or coated, and small marks near the hole opening might be present.
We try to use as many real pictures as we can to represent the keyboard as best as possible, however to supplement these photos we use renders occasionally. These renders may vary slightly compared to the final product.
Colors in the final product may vary since renders are done under idealistic artificial lighting.
When raw or thinly coated, brass will oxidize and patina naturally. Small blemishes and discolorations may be visible.
